1

00:00:00,454  -->  00:00:04,929
In the previous video, we have done configuring
telnet in the router.

2

00:00:05,482  -->  00:00:12,113
But if we see here, we only need to type password
when remote the router using telnet.

3

00:00:12,647  -->  00:00:15,000
We don’t need to use username.

4

00:00:15,800  -->  00:00:16,490
Why?

5

00:00:16,703  -->  00:00:22,959
This is because, when we configure telnet,
we use command login like this.

6

00:00:23,880  -->  00:00:30,445
So remember that if we use command login like
this, we will only need to type password when

7

00:00:30,445  -->  00:00:33,096
remote the cisco devices using telnet.

8

00:00:33,648  -->  00:00:35,661
We don’t need a username.

9

00:00:36,679  -->  00:00:43,450
The question is, how we can configure so when
we remote the route using telnet,

10

00:00:43,799  -->  00:00:46,609
we will need to type username and password?

11

00:00:48,373  -->  00:00:50,531
Okay let’s just try it.

12

00:00:50,957  -->  00:00:55,995
The first thing that we need to do is, create
a username and password.

13

00:00:56,887  -->  00:01:05,129
The command is username and the the user,
let’s say I create user1, then secret,

14

00:01:05,352  -->  00:01:09,888
and the password, let’s say the password is
password1.

15

00:01:10,838  -->  00:01:15,274
So the username is user1 and the password
is password1.

16

00:01:16,689  -->  00:01:23,401
Next let’s go to line vty again, and then
let’s type login local.

17

00:01:24,060  -->  00:01:28,823
This command means that if we want to remote
the router using telnet,

18

00:01:29,017  -->  00:01:31,500
we need to type username and password.

19

00:01:32,120  -->  00:01:37,210
In this case the username will be user1 and
the password is password1,

20

00:01:39,479  -->  00:01:48,704
Now let’s try from the pc, here open telnet
or ssh client.

21

00:01:49,296  -->  00:01:54,059
Choose telnet, type the router Ip address
and then connect.

22

00:01:55,213  -->  00:02:01,453
Okay here we can see that now we need to type
username, the username is user1,

23

00:02:02,742  -->  00:02:05,431
and then here we need to type the password.

24

00:02:05,858  -->  00:02:08,119
The password is password1.

25

00:02:09,312  -->  00:02:13,168
Okay here we are successfully remote the router
using telnet.

26

00:02:13,672  -->  00:02:19,046
And now we need to type username and password
when remote the router using telnet.

27

00:02:20,336  -->  00:02:28,350
May be some of you have a question, how If
we want to have not just 1 user, is that possible?

28

00:02:29,183  -->  00:02:31,724
Yes absolutely, let’s try it.

29

00:02:32,354  -->  00:02:39,324
Here let’s create new user name, let’s
say the user is user2 and the password is

30

00:02:39,324  -->  00:02:40,302
password2.

31

00:02:42,813  -->  00:02:46,316
To verify it, we can use do show run.

32

00:02:50,747  -->  00:02:57,465
Okay here we can see that now we have 2 user, which is user1 and user2.

33

00:02:58,318  -->  00:03:02,560
Now let’s try to login using telnet from
other client.

34

00:03:03,200  -->  00:03:10,424
Open telnet or ssh client, here choose telnet,
put the ip address of the router,

35

00:03:10,657  -->  00:03:18,000
and then connect, okay here we can type the username,
let’s say we will use user2,

36

00:03:18,659  -->  00:03:21,228
and then the password is password2.

37

00:03:25,542  -->  00:03:30,774
Okay here we can see that now we are success
to login using user2.

38

00:03:32,451  -->  00:03:34,940
Okay I think enough for this video

39

00:03:35,270  -->  00:03:38,398
Thankyou for watching and see you on the next video.